📄 Showing the "Simple" version — "Advanced" is not ready yet. Add it to favorites to help prioritize it. Ask for the full read

A flashlight spreads light in a broad beam, while a laser cuts a narrow path and picks out the finest details. In magnetic resonance imaging (MRI), the gradient, a rapid change in the magnetic field along the body, plays the role of that laser. The steeper the change, the more precisely you can track the movement of water molecules in tissues. Tumors alter this movement, and diffusion MRI catches them without any contrast injections. The catch is that standard machines cannot safely produce a very strong gradient for the breast: heating and the risk of nerve twitching get in the way.

Engineers led by William Borucki (a namesake of the Borucki who hunted exoplanets — the work was done in Zurich) assembled a replaceable coil insert. It slides into the scanner like a drawer. The whole setup uses commercial materials, nothing space-age. The wires in the coil are arranged so that twisting and pushing forces cancel each other out, and heat is drawn away without burns. The result: a local gradient of 1850 millitesla per meter. For comparison, a typical scanner tops out at around 40–80 mT/m.

Five volunteers lay in the scanner with the insert — no involuntary twitches, nerves stayed quiet. Eddy currents (stray fields that distort the image) were measured and corrected with standard software. On a phantom made of soy lecithin, which mimics breast tissue, they obtained images with a b-factor of 10,000 s/mm² at an echo time of 78 ms. The standard gradient on the same machine would have required 161 ms. Echo time is the delay between the radio pulse and signal reception: the shorter it is, the less blurring from molecular motion. The twofold gain is the difference between a smeared blob and a sharp tumor outline.

Now the flashlight has become a laser. The insert connects to scanners already in clinics, like an external drive to a computer. The next step is testing on patients, so that contrast-free diffusion MRI becomes part of the standard breast exam.

Original abstract

as written by the authors arXiv:2605.08957

Purpose: Diffusion MRI has shown promise for breast cancer screening, lesion characterization,and treatment response monitoring without contrast agents, but further translation is constraint by the gradient performance of conventional systems. The aim of this work is to develop a single-axis high performance bilateral plug-and-play breast gradient insert to enable strong-gradient diffusion MRI. Methods: An in-house breast gradient insert and bed-tabletop was constructed entirely from commercially available materials, providing a cost-effective solution compatible with existing MRI systems. Its wiring pattern was optimized for torque and force balancing, power dissipation, and target field performance. Evaluation included gradient field characterization, peripheral nerve stimulation simulation verification, and temperature and eddy current assessment. The setup was used for imaging of a diffusion phantom based on soy lecithin across a range of b-values. Results: Gradient efficiency reached 2.8 mT/m/A, enabling local strengths up to 1850 mT/m (660 A). No peripheral nerve stimulation was observed during tests on five healthy volunteers. Eddy currents were successfully characterized employed in standard correction methods. Imaging showed the feasibility of $$b = 10 000 s/mm^2$$ acquisitions at TE = 78 ms versus 161 ms with scanner gradients. Conclusion: This work demonstrates a dedicated bilateral breast gradient insert for safe and feasible strong-gradient breast diffusion MRI, and represents a first step toward dedicated hardware for breast cancer detection and characterization without contrast agents.